Go Greener Tips

Posts Tagged ‘environment’

If you are very confused whether or not you are able to set up an electrical generator in your home, then you will discover this article absolutely advantageous. Here we have outlined quite a few advantages that you can derive from these magnificent magnetic motor devices.

Quite a few benefits of the free energy machine.

Not dependent on any weather environment

Not like the other renewable energy power making designs, like wind turbines and solar collective cells, the electrical generator is not reliant on any natural climate occurrence. A electromagnetic motor is able to continue to create power for your residence under every weather conditions.

Requires less room

The free energy machine system is rather simple to install plus needs just a small space for the instruments installation. Accordingly, the free energy magnet device will be able to be easily constructed even in a small space in your home.

Cost of upkeep is less

An additional beneficial feature about these free energy motor machines is that they require very minimal upkeep expenditure. When the magnet energy instrument is built in your residence the machine is able to continue to operate without having any troubles. Hence, the free energy motor machine removes you from the task of having to inspect the instrument on a regular basis.

Harmless to use

The free energy magnet instruments are totally eco-friendly mechanisms for producing electricity for your residence. They perform in the most harmless and clean manner and do not emit any unsafe gases which may pollute the atmosphere. Consequently, the magnetic motor system is harmless to be used in your house for meeting your daily electricity needs.

Uncomplicated to utilize

The electrical generator is also extremely easy to run. You do not need to be a rocket scientist to grasp its function. Any layman can absolutely simply use the magnetic motor device without any difficulty.

Straightforward to put together

A further benefit of the electrical generator is that the apparatus is straightforward to build. You are able to straightforwardly put together a generator in your residence and do not necessarily have to purchase one already assembled. The parts essential for the machine’s assembly are available in any hardware shop and the entire free energy magnet system will be able to be made in a matter of just a couple hours. After construction and installation, you will be able to continue to profit from furnishing free electric for your house.

Decrease your monthly electricity bill

One of the most significant advantages that you are able to acquire from this free energy device is that it can assist you in generating an enormous amount of power for your household needs, as a result decreasing and maybe even eliminating your monthly power expense.

By means of free energy machines you are able to produce adequate free power of your own and will no longer have to rely on the electricity company for your every day power needs. Therefore your electric bill should drastically lessen and you will be in an arrangement to save lots of your own hard earned money.

For numerous people who normally end up incurring high monthly electricity bills, an electrical generator is really a welcome benefit for them.

Grab helpful information about the topic of electrical generator – please study the site. The times have come when proper info is truly within one click, use this possibility.

Magnetic motor is basically a free energy magnetic motor which takes advantages of the natural forces of the magnets to make a very large amount of electricity. It is also commonly known as the perpetual motion generator because the device is able to continue to run perpetually or in other words indefinitely without the support from any additional renewable devices or resources to power it. Above and beyond helping you to power your complete household you can additionally utilize the magnetic perpetual motion generator to power your own vehicle in times of need.

Building the electromagnetic motor

The good thing about the magnetic perpetual motion generator is that the devices have a very simple assembly. If you desire, you may also make the magnetic motor at your residence completely by yourself.

For this you want to surf the net to obtain the needed information regarding the construction of a magnetic motor. There are numerous websites on the net which supply worthwhile information that may certainly assist you to build a magnetic generator for your residence.

For successfully assembling a free energy magnet generator for your home you must properly obey the instructions which are furnished on the net. Try not to make any blunders or else you may not be able to put together an effective magnetic power generator for your home.

Time required

Actually, the time required for creating your own magnetic generator is incredibly little. You are able to put together the whole free energy magnetic motor in a matter of just a couple hours. The construction is unbelievably uncomplicated. You do not need any expert engineering education or know-how to assemble this magnetic perpetual motion generator. Any nonprofessional will be able to put together the electromagnetic motor.

Price of construction

The price of creating your very own magnetic motor is also reasonable and within your means. You do not need to spend an immense amount of money to build the free energy magnet generator. You merely need an extremely small outlay to make the magnetic power generator. Even the parts necessary for the assembly purposes are always simply accessible. You can simply get the resources from most hardware stores in your locality.

You need basic tools to put together the free energy magnetic motor. It is not necessary for you to buy extra-ordinary tools and equipment for this magnetic generator. With the assistance of merely a few tools and the correct preparation you are able to effectively create a free energy magnetic motor for your home.

After you have constructed your own magnetic motor you will continue to enjoy getting free electricity for a long period of time. Comparable to the assembly, the price of operating the device is also unbelievably minor. You will no longer need power delivered for your home from the neighborhood authority. Now you will be able to power your home with the help of your own electromagnetic motor.

Accordingly, do not misuse time and cash in buying an previously made electromagnetic motor for your residence but utilize the net service in putting together an useful magnetic motor for yourself.

Get instant access -> Find Out: How to produce at no cost electricity intended for your home w/ a magnetic motor information will be found here.

Fetch useful advice about magnetic motor – please make sure to go through this site. The time has come when proper information is truly only one click away, use this possibility.

The recession that we have lived through recently has made people rethink a lot of things. Many of our expenses were greatly reduced in order to survive. Of course, it had a great effect on our lifestyles, but in many cases, we didn’t have any other options area

Ironically, the recession caused many things to rise in price. For instance, we noticed increases in commodities and energy. As our incomes were reduced, our expenses were increased. We needed more money to put gasoline in our cars and to heat our homes. Therefore, we had to become a little more creative and find ways to reduce those needs. While we did that, we also saved money and helped the environment.

Using a portable space heater to make a room more comfortable is the key to reducing your heating costs. These particular small appliances make a big difference in both ways, with regards to your savings and to benefit your environment

There are many to choose from such as the DeLonghi space heater. The fact is, you can turn down your heating throughout the entire home and just focus on the room that you are currently in. So there is no energy being wasted, hence you are saving money.

In addition to things like that, there are other things that you can do to reduce your costs and consumption. While most people think that it only has to do with energy, there are many other ways. For instance, when you spill something, most of us will run to the paper towels. But, it may take practically a whole roll to clean up the spill. Instead of doing that, turn to either a rag or a vacuum wet dry.

That’s a lot of trees being wasted for nothing if you opt for the paper towels. But this little appliance is a greener way and in the end more economical. They don’t cost a lot and they will last for many years. The cleanup is easy and quick, regardless of whether it’s a wet spill or a dry one.

These little efforts will make a huge difference not only for your pocket but also for your environment. Protecting our planet is the key for the future generations. If you don’t feel this way, just think of your own children having to grow up in a world that is a far cry from what we know it today.

Every year thousands upon thousands of tons of trash is thrown into landfills. While we are in no danger of running short on landfill space, this is expensive in terms of time, space, and energy invested, as well as the sheer waste of materials that will not ever be used again. With that in mind, consider the reasons below for keeping your aluminum and steel cans out of the landfill by recycling them instead.

- Aluminum which has been recycled is used for new projects within a couple of months. On the other hand, it would take over 200 years for that same to break down naturally if were just thrown away.

- Recycling is not just about material savings, but also about energy consciousness. Every aluminum can which is recycled saves enough energy to run a tv for 3 hours.

- Metal cans can be recycled for cash at many places. Several states offer five cents per can recycled, and some recycling centers pay anywhere between fifty cents and two dollars per pound of cans recycled.

- Recycled steel and aluminum are no different in composition from ‘new’ aluminum and steel. Recycled metals are simply melted down and then forged into new products, which can then be recycled again when they are finished being used.

- On average, Americans recycle around 100,000 aluminum cans per minute. The majority of that figure is a result of certain communities working hard on special projects, and that is something that you should encourage those in your neighborhood to take up, as recycling can really help with bringing a community together.

- The 100,000,000 ‘new’ steel cans made on a daily basis contain 25% recycled materials. That is the equivalent of 25 million reclaimed cans vs. 75 million completely new cans. If people recycled more frequently, that number would soon become 50-50 and a great deal of energy and resources would be saved.

- The United States currently uses steel which is more than 65% recycled. This is a good start, but there is definitely room for improvement. Significant further progress would be made if more people were aware that they can recycle their steel cans.

- There are multiple can-crushing machines available, and you can even make a home-made one for free. Therefore, it is no excuse to say that recycling cans takes up too much space within your home.
—
http://www.cancrusher.org.uk is a site offering information about recycling aluminum and steel cans.

Unless you have been living on another planet recently, you will know that environmental and sustainability issues have been a hot topic. Twenty years ago, very few people even thought about where their food, tableware or other products were sourced from. It was a case of what do I want and where do I get it. This attitude is not sustainable however, and a shift in thinking is needed especially in these times of weak economy and global warming. Taking some time to think about where you get and how you consume your food can have a surprisingly big impact.

Local Producers. We have become complacent about being able to buy things like bananas all year round and having access to every spice under the sun. However, a huge amount of these products are flown thousands of miles from other countries and this causes problems. Not only does the transport release vast amounts of CO2 into the atmosphere, due to burning fuel and having to use a food and wine cooler to keep the produce chilled all the way, but also local food suppliers struggle to compete with low foreign costs. If you don’t want to see local businesses going under, make sure you support them and shop local as much as you can.

Fight Packaging. It is staggering just how much packaging is used to make modern food attractive and increase their life-span. A single cake might be singly wrapped, inside a little box with a plastic place-holder, which is cloaked in cellophane and transported within a cardboard box, with the other cake boxes. It is often the case that such packaging is completely redundant, so do your bit and try to buy loose or sensibly wrapped goods.

Ethically Sourced Accessories. More than just the food you buy can influence the planet when you eat. Everything from the cutlery you use to the little wine gifts bought for yourself or other can have just as much influence and the consumables themselves. Ask yourself where this ware has come from, is it something that could be made from a more sustainable textile, and is this a disposable product when I could be purchasing a reclaimable one? A good example of this is chopsticks as the disposable kind accounts for acres of lost rain forest every day.

As a result of the small amount of resources and our ever increasing needs many individuals and businesses are trying to go green. The Las Vegas strip is essentially leading the pack. Las Vegas Boulevard sits in the center of the desert. In normal years they only get four inches of rain per year, but they have been in a drought for several of those years.

They rely a great deal on scarce resources. Most of the city depends a lot on oil and natural gas to keep the city going. In July of this year the city sucked up 5,586 megawatts. These are huge numbers and the city of light can’t use non-renewable resources forever. The city itself has to rely on Lake Mead for its water. In October 1999 water at Hoover Dam was 1,213 feet deep but now it’s only 1,093 which means the water level has gone down by 120 feet.

This metropolitan sucks up huge numbers of energy and it can’t keep doing that. Thus the city has made some changes which will allow the city to keep going but support a sustainable model. The city is making efforts to go green slowly but surely.

Harrah’s Entertainment owns both Caesars Palace and Paris Las Vegas has already spent $60 million on conservation changes in the last six years. There have even been cooperative projects like a multi-resort laundry facility which has slashed water use by 30 percent in the face of the 40 percent increase in size and a cogeneration plant that can create enough electricity to power one of the hotels two towers.

They have also begun building new casinos that are kinder to the ecosystem. City Center, MGM Mirage’s 67-acre resort complex was developed green enough that they were awarded the LEED Gold Certified, the second highest qualification from from the U.S. Green Building Council (USGBC) . The casino will reduce the use of electricity by using a cogeneration plant, glass and sunshades that let light in but reflect the heat and low-flow fixtures which reduce indoor water use. Plus the excess heat will be used to warm the resorts water supply.

Even though the new hotel is gigantic, the designers really challenged themselves. They decided to make a larger building that was environmentally friendly over a smaller building that was semi green. The designers pushed themselves on green designs and are pleased that they received a LEED award.

Las Vegas will still have the casinos, the shows, and the fluorescent lights. An oasis for visitors that want to let their hair down and have a great time. Everything will stay the same, because visitors still want Vegas to remain the same except for the natural resources that are being wasted in the city.. Going green is important in shielding the earth and it’s inspiring that Las Vegas is choosing to lead the pack.

About the Author Info
Diane Johnson graduated with a Bachelor of Science from the University of Utah and enjoys writing about current events, politics, &LINK2%, online education, and the office. Her work gives her plenty of chances to educate others about continuing online education

The Future of Solar PV (Photovoltaic) Energy
1. The Problem
2. The Solution
3. The Results
4. The Benefits
5. An Investment in the Future

1. The Problem:

Traditional sources of electrical power generation are running out as production will peak in the next decade but demand will continue to rise. Energy prices will continue to rise at a higher rate as well as the number of outages during peak hours. There is the obvious problem of the pollution we are causing to our environment.

From my perspective, the world’s energy needs vary greatly; there is no clear single solution to the problem of supplying the world’s energy.

All forms of energy production have issues associated with them, i. e. -

1. Coal – Pollution/Strip Mining
2. Natural Gas – Cost and Lack of Infrastructure
3. Hydro – Limited Availability/Environmental Concerns
4. Wind – Limited Site and Resource Availability
5. Solar PV – Higher Cost
6. Nuclear – Waste disposal

2. The Solution:

Solar PV (Photovoltaic) systems effectively deliver three to five hours of peak power per day at roughly 10 Watts per square foot. Not one square inch of new land would be required to site PV. Theoretically, there are adequate residential, commercial, Government rooftops, and parking structures in California to power a substantial percentage of our State’s electrical needs from solar.

In Southern California, solar produces a net energy gain in approximately three years. This means that within three years, PV systems begin producing more energy than the energy spent in producing the system and its raw materials. Best of all, the energy produced cost zero emissions.
At today’s prices, a typical solar system costs approximately $8.00/watt, installed and has an operating life in excess of 25 years. For all intents and purposes, maintenance and operating costs are minimal. Now there are systems available for rent. Companies such as Citizenre at www.jointhesolution.com/rethink-solar allow you to create solar power of a unit that is installed, maintained and monitored by them. You merely pay the monthly rental fee for you clean electricity which is the same price as you pay the electric company for you electricity. Also they allow you to lock in a rate now for up to 25 years so you are paying the same price throughout the entire contract.
3. The Results:

Solar energy increases the diversity of power and adds stability to a fossil fuel favored energy structure, while reducing greenhouse gas emissions.
4. The Benefits:
– Solar can be quickly deployed at the point of use, reducing the need for additional transmission and distribution infrastructure, and cost thereof.

– Solar operates most efficiently at mid day, when grid demand is at its peak. By decreasing the strain during peak hours, the longevity of existing power plants and infrastructure is extended, lowering further the cost of energy production.

– By deploying solar over time the cumulative effect of the installed base is impressive. Given its 25-year life, within 10 to 20 years, a respectable portion of California’s energy could be supplied by solar.

– Once installed, the cost is fixed. In comparison to traditional sources of energy, the fuel cost is nonexistent, and operational costs are limited. A solar system’s cost is amortized over its life, there are no rate hikes due to fuel or operating cost increases.
5. An Investment in the Future:

There are some negatives. Presently, solar costs more than traditional energy generation. Its efficient use is limited to daylight hours unless storage is employed. Admittedly, the solar industry today is not large enough to address all of our needs. The solar industry does not have the financial influence to compete with existing utilities, which typically oppose PV, within political circles. (Industry revenues globally represent only 3.0B/year). Globally, the industry has experienced an annual growth rate in excess of 18% in over a decade. This rate of growth is equivalent to that of semiconductor, telecommunications and computer industries.

Clearly, there is no easy solution to California’s energy problem. No doubt, a variety of technologies and tools are needed to ensure California’s energy independence and security.
The Solar Industry Needs Your Support
For those interested in promoting a clean, safe and environmentally friendly source of energy, I urge you to write your representatives in the State and Federal Government. Make it clear you vote for representatives who support current legislation aimed at advancing the deployment of solar energy, such as the net metering law which allows the solar producer to feed surplus power onto the grid, causing the meter to spin backward, lowering the electric bill. Tax credits and deployment subsidies provide the revenues necessary to support research and development of more efficient solar systems.

Remember, in the 1970′s the State of California enacted emission standards that surpassed the rest of the nation. The argument against these standards was the cost of such improvements. Almost 30 years later, the impact is in the air and reflected in the increased fuel economy of the vehicles we drive.

Solar energy is part of the solution and is a key to America’s long-term energy supply. After all, fossil fuels have a long history of issues with respect to stability of supply and cost.
The Outlook of Solar Power is Bright!
1. Solar will sustain its torrid growth, as costs continue to fall. The solar market has grown at ~40% per annum in recent years, and there are many reasons to think that it will sustain, if not exceed, that clip in 2008. Solar panel prices have followed a predictable experience curve since the 1970’s, with prices dropping by 20% with each doubling of manufacturing capacity. As the silicon-dominated industry moves to thinner and higher-efficiency wafers, increases manufacturing scale, improves wafer and cell processing technologies, sees polysilicon prices return to rational levels, and migrates production to lower-cost countries –- costs will continue to drive towards parity with grid rates, and solar will become increasingly more attractive. Companies have developed creative PPA (power-purchase agreement) financing models to reduce or eliminate upfront installation costs, which will make solar more accessible for a wider range of corporate and residential customers. The election year should also see more state subsidy support for solar and a renewal of the federal tax credit, which will further bolster growth.
2. Emerging startups that benefit from the polysilicon supply shortage will face increased pressure, as the poly-Si crunch begins to ease. Solar veterans can debate the timing endlessly, but many expect additional poly-Si supply to come online by late 2008. Startups that tout silicon-independent solar solutions, like concentrators and thin film (CIGS, a-Si, CdTe, etc.), will face pressure to come to market more quickly, as their cost/supply advantages erode with greater availability of poly-Si and a retreat from spot-pricing. E.g., none of the CIGS thin-film startups, which have collectively received hundreds of millions in investment in recent years, managed to reach mass commercialization this past year as many had projected. They will continue to be under pressure to reach market before the window of opportunity closes.
3. Entrepreneurs will increasingly look beyond cell and module production. As the technology-heavy areas of cell and module production get crowded, more and more entrepreneurs look to startup opportunities in the downstream balance-of-systems part of the value chain. This area has seen less attention to date, yet makes up ~50% of the total installed cost. Novel packaging techniques, distributed inverter / MPP tracking / power management technologies, systems monitoring solutions, streamlining of the installation process, and creative solar financing models — entrepreneurs increasingly recognize the ripe opportunity in this part of the solar business, and 2008 should see heightened startup activity in this area.
4. China and India will begin to emerge as strong domestic markets for solar. With a 500 MW coal-fired plant going up in China every week, the growth of greenhouse gas emissions has reached dizzying levels. China already “boasts” 16 of the 20 most polluted cities in the world, with hundreds of thousands a year dying prematurely from such pollution. Many experts expect that the government will spend tens of billions of dollars in the next 5-10 years –- a significant portion going to solar -– to reach the mandate of 15% from renewables by 2020. In India, where the energy shortfall has reached 15% and domestic coal reserves will run out in ~50 years, the government is actively pursuing incentive policies and feed-in tariffs to help drive the use of solar and other renewables. 2008 should see further policy refinement in both countries, which will spur increased domestic adoption of solar.

Few people doubt solar energy’s potential, but many wonder when it will be reached. “In the long term, solar may well play an important role,” Karg says. “I personally expect a contribution of 10 to 20% of the global electricity production, mainly in the form of grid-connected systems.” However, he does not foresee that happening within the next 20 years.
Nevada Solar One
The sun sits high over the Nevada desert in the Eldorado Valley, gleaming off the upside down rows of mirrored parabolic trough collectors at the Nevada Solar One power plant.
At 64 megawatts (MW) of generation capacity, Nevada Solar One is the largest CSP plant to be built in 15 years. While the plant won’t come online until April, its construction marks the revival of an industry that has seen almost no market growth in over a decade.

The plant was developed by Acciona Energy and Solargenix Energy — two companies that have worked hard behind the scenes to get the CSP industry up and running again.

The plant uses parabolic trough collectors to generate electricity. The mirrored troughs face the sky and direct sunlight to a large metal and glass receiver in the middle of the trough that holds circulating oil. The oil travels to heat exchangers, which heat water and create steam to run a turbine. Parabolic troughs are one of three commercialized CSP technologies.

Further down the row of parabolic troughs, Plant Manager Bob Cable admires the impressive devices before him.

“I’ve been working with this technology for the last decade,” Cable says. “I’ve seen some impressive gains in technological advancement, and now we’re seeing more broad acceptance of the technology as the market becomes more attractive.”

Indeed, after roughly a decade of little growth for the industry, CSP is coming back strong. And it’s not just parabolic trough collectors that are experiencing a boom. Power towers, which use heliostats to focus solar energy on a central receiver to produce steam, and dish systems, which use reflectors to power a generator at the dish’s focus point, are making great strides in technological capabilities, lower costs and market acceptance.

But according to Thomas Rueckert, Program Manager for CSP Management at the U.S. Department of Energy, parabolic troughs are the most advanced.

“Because of the track record [the parabolic trough industry] had in southern California with the 354 megawatts (MW) operating — and actually improving in performance — I think you’re seeing the financial institutions more willing to embrace trough technology because it’s proven and the risks are less,” said Rueckert.

Rueckert was referring to the 354 MW of parabolic trough collectors installed in California’s Mojave Desert between 1984 and 1990. Those plants are still operating today, currently producing energy at around $0.12-$0.14/ per kilowatt-hour (kWh) and proving the technology can provide clean, reliable energy to the grid.

The Nevada Solar One plant will produce electricity at around $0.15-$0.17/kWh. While those costs are double what area residents pay for electricity, Nevada Solar One will sell energy to two utilities through a power purchase agreement (PPA). The PPA will ensure a fixed cost for the electricity over a long period, making the solar power economical down the line.

Now that global investment in CSP is increasing, technology costs are decreasing and renewable portfolio standards (RPS) in the U.S. are requiring more solar generation, project costs for all CSP technologies should come down significantly in the coming years, said DOE’s Rueckert.

“All of those things have really opened the door,” he said. “And it’s interesting that all three technologies are pushing forward, which was kind of unexpected.”

Back at Nevada Solar One, Acciona Solar’s Cohen stands before the group of reporters and members of the solar industry who have come to witness the rebirth of CSP.

“The potential is huge. It was difficult to get the attention of the financial institutions in the U.S., but right now we have their attention. We get a lot of people asking us, ‘how can we develop this technology?’”

Dr. Alex Marker, Research Fellow for Schott North America, Inc., stands to the side of Cohen, nodding his head. Schott is certainly feeling the positive impact of increased CSP development. To meet the demand for its glass receivers, the company brought a new receiver manufacturing facility online in Germany last summer and is developing another facility in Spain that will come online in early 2008.

“I think [the market] is going to grow drastically,” says Marker, looking over at the receivers in the troughs. “We’re happy to be a part of this new development.”

Now that financial institutions are noticing CSP, companies like Acciona and Solargenix will be able to tap into the vast resource potential in the Southwestern U.S.

According to figures from DOE’s Solar Lab, 20,000 MW of CSP capacity could come online in the U.S. by 2020 with the proper investment and technological capabilities. Rueckert seemed optimistic that a large amount of those resources will be tapped.

“When this plant comes online next month, it’s going to be a great success,” he said. “The market is exploding and things are really taking off.”

Indeed, a solar panel for your home, whether brand new, second hand or rented, is definitely a wise choice as it helps you in minimizing your electric bills, helps the worlds growing energy needs and is especially an environmentally healthy and helpful choice.

If you’re interested in getting more info on a free solar panel installation check out www.jointhesolution.com/rethink-solar

Also if your interested in joining the solution and becoming a Citizenre sales associate check out www.powur.net/rethink-solar

Learn how to create electricity and save your bills!! Read on how you can make your very own solar panels at your own home! small solar panels small solar panels