Go Greener Tips

Biomass is one form of alternative fuel. Supplementary common forms of renewable energy include solar in addition to wind power. A alternative form of fuel simply refers to a source of fuel which we can replace within the life span of its consumption. Fossil fuels for case are none alternative. Fossil fuels take thousands of years to develop, plus our rate of consumption is far beyond the rate at which new fossil fuels are been produced. Wind plus solar energy are alternative from the point they are pretty much always accessible. Visibly certain places have more sun in addition to wind than additional, so the positioning of these types of alternative energy solution is critical. The other issue by way of wind in addition to solar is the fact they cannot always provide fuel on demand because of weather conditions. This is where biomass has its advantages, wood is essentially a store of solar energy. Due to burning as well as other processes the energy from wood can be released.

Learn more about Biomass Renewable

Alternative energy is very important to provide adequate energy sources for the future, yet tackling climate change is also very important. The key issue by means of climate change is to lower carbon emissions. Carbon dioxide along by means of quite a few additional greenhouse gases are responsible for reflecting the suns energy, rising global temperatures. Now, with wind and solar energy it is clear that they do not create any emissions. Though, when it comes to wood many people are unclear how incineration wood can still be green form of energy. The reason incineration biomass is carbon neutral, is because the carbon dioxide released during combustion was already component of the current carbon cycle. There is therefore no net increase in the levels of carbon dioxide. However, what is important is efficient burning. Combustion logs on an open fire is technically carbon neutral, though in the smoke generated there are a variety of unwanted and dangerous chemicals. Biomass in its raw form is very hard to burn efficiently without smoke as it has a low density in addition to high moisture percentage. Therefore to decrease the smoke generated the wood needs to be processed.

Read more about Wood Pellet Fuel

One of the simplest plus most practical processes to upgrading wood in a low smoke, highly efficient fuel source is to compress the biomass into pellets. In fact once a pellet fire is up to temperature, no visible smoke can be seen from the smokestack. Pellets have a moisture content below 10%, which is much lower than raw biomass materials, in addition to means a much higher combustion heat can be achieved. This burns up the volatiles and particulates, dropping smoke output. These pellets can then be used in pellet stoves. To process biomass into pellets requires a pellet mill. However, not all pellet mills are the same, along with some are much better at compressing diverse forms of biomass. Take grass plus biomass for case. Each of these materials can be used a fuel pellets. Yet the pellet mill will perform differently by each material. Biomass requires higher compression temperatures plus also more torque in addition to power.

More information on Wood Pellet Shortage