Go Greener Tips

Pellet stoves like any heating equipment require some attention from time to time to keep them running efficiently. There are general points of maintenance, plus there are also on old stove parts which may fail. In terms of general maintenance, there are a few key areas to focus on. Firstly the general day to day job of checking how much fuel is within the pellet stove hopper. Depending on the size of the hopper on the stove, it may requiring filling every day or every few days. Then a daily check on the amount of ash there is in the bottom of the stove, along with ash bin. Again how frequent you really have to do this will change depending on the size of your ash bin, plus type of fuel pellets you have been using. A yearly check should actually be manufactured on the burn pot itself. As the burn pot is at the heart of the combustion process, it is subject to extremely high temperatures, at which corrosion rates are accelerated in addition to it may necessitate repair.

Learn more about Pellet Vent

The increased corrosion risk also goes for the heat exchanger. The warmth exchanger is where the incineration gases leave the fire, in addition to heat is transferred into the warmth exchanger before the gases leave to the flue pipe. How the rate of corrosion effects the burn pot as well as heat exchanger depends on the quality of the pellet stove plus materials used. For case in point, at PelHeat we burn large quantities of grass pellets which are highly corrosive. Therefore the heat exchanger on our pellet boiler is double the thickness of the steel used on most pellet boilers. The same also applies for the burn pot which is constructed of cast fire brick. Other than the burn pot and incineration chamber, the auger feed along with hopper call for yearly maintaince, plus may necessitate repair. On some lower quality pellet stoves, the auger drive system, auger or auger motor may require replacement or repair. Some designs of auger rely too heavily on perfectly sized pellets of a perfect density. Though some pellets are longer as well as hard, in lower quality pellet stoves this can cause the pellet feed auger to stop and even break. The production should provide the parts for the repair.

Read more about Pellet Stove Vent Pipe

As with any product, there are lower as well as higher quality products obtainable. Where by way of some purchases it may make sense purchasing the cheaper lower quality item, this is not the case with pellet stoves. That is not to say that you should only obtain the most expensive pellet stoves. More that there are certain features you should spend your money on, as well as other features that are not crucial for a pellet stove to warmth your home or corporation effectively. Areas where it is important to spend more are on a better designed hopper plus pellet feed system, by a robust auger motor and auger. A stronger pellet feed system will eliminate issues owing to long plus dense pellets, that would manufacture issues for other pellet incineration systems. The guide can help show how.

More information on Pellet Stove Repair