Go Greener Tips

Making biomass pellets is a process which can be achieved on both a large along with small scale. As by way of most industries, the development of large scale biomass pellet plants at present dominates the biomass pellet manufacture market. Yet, there is a rising number of wood pellet machines available for even small abode owners to use to create there own pellet fuel. Though there is very little information obtainable on which wood pellet making machinery is suitable to process unlike wood materials for fuel pellets.

Learn more about Wood Pellet Making Machine

The pellet machine has been an industrial tool for over a hundred years. The first intended use of the pellet appliance was to make a superior animal feed. The idea was to process the grasses, straws, vitamins in addition to minerals into pellet form. The advantages of such were that it would be much cheaper to haulage the feed, much easier to get the animals to take the required mineral in addition to vitamins plus eat the correct amount of food to achieve the top price to profit ratio. Pellet machines were very successful in the animal feed industry along with today, pelleted animal feed in the market leader as a way to control feed to stock animals.
Yet, the type in addition to design of pellet machinery used form making animal feed, is not the same type of pellet appliance that can be used for making a biomass pellet. Biomass as a raw material is very dissimilar to straws as well as grasses. Biomass has a much higher density and stronger fibres. These differences mean wood performs very differently in the pellet machine. To compress a material into a pellet requires ample temperature along with pressure to melt the materials untreated lignin. Owing to the increased density of wood, means that wood has to reach a higher heat than grasses along with straws to form a pellet. Also, due to the increased density of the biomass, more power is needed to compress the wood due to the die template in the pellet appliance. This generally means the pellet machine needs to be geared down to provide more torque. There are a range of supplementary changes in design of the pellet machinery to compress biomass into pellet form.

Read more about Biomass Products

Not all biomass pellets are the same, depending on the type of wood residue used to create the pellets the ash content of the pellets can change. For case, to create a pellet by as little ash as potential, practically all bark must be removed from the pellets. In many cases on the other hand, this is not practical, in addition to also bark contains a lot of fuel. However the pellets shaped will have a higher ash content, in addition to this may limit the number of pellet stoves as well as boilers the pellets can be burnt in successfully. Generally pellet stoves plus boiler which have a drop down design will not be able to burn the pellets. Therefore it is much better form consumers to avoid this design of pellet burner. When making a wood pellet, before placing the matter into the appliance, it is very important to monitor the moisture content in addition to make sure it is dry adequate but still have adequate moisture to melt the untreated lignin to help bind the wood pellet together.

More information on Burning Wood Pellet