Go Greener Tips

3,673 kg of water falling over Niagara falls creates only one kWh.

To generate just 1 kilowatt hour which we waste without worrying or thinking, would require the water volume of six residential swimming pools to flow over a one meter drop through a generator in one hour!

Many dictionaries outline energy as “the capability to try and do work”, and power as the speed at which energy is used.

Potential energy refers to the energy that an object has by virtue of its elevation on top of the planet and also the impact of gravity flattening on it.

Kinetic energy refers back to the energy that an object has by virtue of is velocity.

Thermal energy refers to the energy that an object has that will be released by “burning” or oxidizing it.

Electrical energy, that we commonly use to power our homes and businesses, relies on the movement of electrons through a conductor.

When we convert one type of energy to another, we typically lose between thirty five% to seventy five% of the original energy as waste heat.

So, creating electricity from burning coal or from harnessing the energy of a water fall (such as a hydro electrical dam) needs regarding 4 units of energy going into the system for 1 unit of electricity being produced.

The watt is defined in most dictionaries as “a standard unit of measure for power, the SI derived unit of power, equal to at least one joule of energy per second”.

A joule is a huge amount of energy.

One liter of water weighs 1000g, or 2.2 pounds.

If 102g, which is 102ml of water is 1 meter off the bottom it’s a possible energy of one joule.

one Watt is outlined as 1 joule per second.

Meaning, assuming a thirty three% economical conversion of potential energy to electrical energy, that 3 joules per second must be used to form 1 watt of electrical power.

This suggests that 306 ml, or 306g of water must flow each second over a height of one meter to make one watt of electricity.
This suggests that 1101 liters of water or 291 US gallons of water should flow each hour to make just one watt of electricity.

26,424, 6990 US gallons of water must flow over a 1 meter drop each day to form simply 1 watt of electricity, or a complete of 24 watt hours of electricity.

A sixteen foot x thirty two foot typical residential swimming pool holds approximately seventeen,000 US gallons, or sixty four,260 liters of water.

If ALL of the water from a typical swimming pool, 17,000 US gallons, sixty four,260 liters flowed down over a drop of 1 meter to drive an electric generator with a thirty three% potency, we could:

Flip on 2 3.5W Unity(TM) whole LED Lights bulbs [http://www.omachronlighting.com] for over 24 hours.

Flip on one 13 W compact fluorescent light-weight bulb for 13.five hours

Turn on one forty W bulb for 4.thirty seven hours

Flip on one 60 W bulb for 2.9 hours

Turn on one a hundred W light bulb for 1.7 hours

Flip on one five hundred W halogen “work light” for twenty minutes

Flip on your 1500 W hair dryer for 6.8 minutes

Turn on your 3000 W air conditioner for 3.four minutes

Turn on your 8000 W clothes dryer for only 1.28 minutes

Replace your inefficient incandescent and your medium potency mercy filled compact fluorescent light bulbs with low cost, high potency LED Light-weight bulbs and help create a higher future and save money.

Visit Omachron Lighting Corporation [http://www.omachronlighting.com] for a lot of info regarding LED light-weight bulbs.

P. S. The sun provides us with an AMAZING quantity of warmth energy each day – two kWh of energy per day per square meter. This is often an enormous quantity of energy and will be value effectively harnessed.

Learn more about energy 2 green. In order to save energy you should know about energy 2 green. Click here for more information about energy 2 green review.